Tuesday, May 4, 2021
2:10 PM - 2:30 PM (EDT)
The Balance Between Deposition Rate and Ionized Flux Fraction in the High Power Impulse Magnetron Sputtering Discharge
Jon Tomas Gudmundsson - University of Iceland

*Jon Tomas Gudmundsson1,2, Hamidreza Hajihoseini1,3, Martin Rudolph4. Tiberiu M. Minea3, Michael A. Raadu2, Nils Brenning2,3,5, Daniel Lundin3,5
1University of Iceland, Reykjavik, Iceland; 2KTH Royal Institute of Technology, Stockholm, Sweden; 3Université Paris Saclay, Orsay, France; 4Leibniz Institute of Surface Engineering (IOM), Leipzig, Germany; 5Linköping University, Linköping, Sweden
The main drawback of the high power impulse magnetron sputtering (HiPIMS) technique is the low deposition rate. The deposition rate in HiPIMS operation is typically in the range of 30-85 % of the dcMS rates, depending on target material. This is mainly due to the back-attraction of ions of the sputtered species to the cathode target, while some other mechanisms have also been suggested as well. This includes the nonlinear sputter yield effect, guiding effect of the magnetic field, the increased density of the deposited film, the effect of different ion species on the sputter yield and that the sputtered material is being transported radially outward in the vicinity of the cathode. We discuss how the magnetic field strength |B| and geometry (degree of balancing) influences the deposition rate and ionized flux fraction Fflux in dcMS and HiPIMS operation both axially and radially. We then relate the deposition rate and the ionized flux fraction to the internal parameters that describe ionization probability αt and the back attraction probability of the sputtered species βt. We conclude that the reduction in the (axial) deposition rate in HiPIMS compared to dcMS is not due to an increase in sideways material transport in HiPIMS. We discuss the trade off between a high ionized flux fraction of the sputtered species and a high deposition rate referred to as the HiPIMS compromise, and other approaches to optimize the sputter process such as shortening the pulse length.

Session Type